Description
– Constructed in high modulus carbón fiber, not only to get a really low weight, also to offer a great finishes, stiffness and strenght unbeatable.
– Highly tested in out Taiwanese lab, passing the “EN” impact and fatigue testing perfectly after few samples.
– Carbon layers are positioned in the same position, unidirectional (UD), offering a great strenght compared with other 3K forks.
– 180mm long steerer tube, with an aluminium insert to provide better stiffness. Also comes with an M6 threaded area, so no star nut needed.
– Steerer tube comes with two Kevlar layers to offer better stiffness against big impacts.
– Integrated 45º Crown race, the bearing sits directly in the fork without the need of a Crown race.
– Tapered fork offers so much stiffness and strenght than standard 1 1/8” forks. Suitable only with tapered frames with 1 1/8” in the top and 1/5” in the bottom.
– 8mm thickness opened dropouts, without aluminium plates, spaced at 100mm makes this fork suitable with all the hubs in the market with a 10mm diameter axle.
– UD finish, with nice Clean matt grey graphcis in the outer side and a large White sticker inside. Steerer tube comes with any design due of the Kevlar layers.
Weight: 503g (with 180mm steerer and with no need of star nut).
Fork geometry:
-Axle to Crown lenght 400mm
Axle offset: 35mm
Steerer tube length: 180mm
